Fixing a leaking toilet is one of the most challenging tasks you will have to do at some point. A running toilet is more like a bad comedian-it doesn’t know when to stop. It can run sporadic or constant leaks into the bowl, wasting a lot of water and is likely to keep you awake the whole night. Depending on the size of the leak, you can lose up to 500 gallons of water in a day from the leaking toilet.
In most cases, you can fix a leaking toilet without having to call a licensed technician. It is, however, important to do your homework. Before you start, you will first need to turn off water from the knob located on the wall and cover the basics. Check out this top toilet review.
Know where and what each component is in your best budget toilet. The water in the tank is clean, so you can adjust the parts without wearing gloves.
Steps for Fixing a Leaking Toilet
Turn off the Water Supply
The first step you need to take is turning off the water supply to your toilet by tightening the knob on the wall behind the toilet
Open the Lid to the Flush and Tank
Observe how the water goes down the toilet valve in the tank. You should be able to identify the problem, whether it is the toilet chain stuck or an object stuck in the flapper’s closing way or something caught.
Check the Fill Valve
If you don’t have enough water in the tank, the toilet will run. You will also want to check the fill valve to see if it has been fitted well. If not, turn it and the tank should start filling up. Read best toilet review.
Test the Flapper
You can use a finger or stick to push down on the flapper. See if the water stops running. If it doesn’t, then you have a flapper that has not been sealed well. The only option would be replacing it.
Adjust or Replace the Ball Float
Check to see if the ball float is waterlogged or in bad shape. If yes, then you will have to replace it with one from the Best Toilet.
If it is in good condition, pull up the float to see if the water will stop running. If the flow of water is stopped, adjust its level so that the tank can stop filling when the water is about 2cm below the top of the overflow tube.
If the float is around the valve post, try to pinch the metal clip and then move the float down on the wire. Find the small crews on top of the valve and tighten them with a screwdriver to lower the ball float. You may want to check out the best toilet reviews.
It is important that you check your toilet on a regular basis to ensure that it does not have problems with leakage. If you find that you cannot fix a leaky toilet, you may want to call an expert to help you. They will be in a better position to recommend the right measures. You may also want to read best toilet guide and top toilet reviews.
Hi Rick here. I am civil engineer & also expert in interior design.